How to Make a Winter Nail Design, Summer Design Home and a Summer Home Design

When you’re ready to create a winter nail design, you can begin with the following steps: Make sure the nails are well cut.

Do not use a nail cutter.

Cut the nails in half.

Cut a length of the nail.

Using a sharp knife or scissors, cut the nail into a desired shape.

If you have time, consider cutting the nails into smaller pieces to create the look of smaller nails.

Apply glue to the edges of the nails and the bottom of the design.

Apply the glue to one side of the cut edges of each nail and to the bottom.

Apply a coat of acrylic polish to the design to finish the look.

Make a design on your nail.

This is a time-consuming and time-intensive process that requires a little creativity, but it can be done.

Once you have the nails cut, you need to make a design that looks great.

The next step is to apply the glue on the design that you want to create.

Apply acrylic paint to the nail and paint on the outline of the outline.

The paint should not be too thick, as the acrylic will absorb the paint.

Apply sealer to the outline to prevent the acrylic from sticking.

Apply wax to the sides of the designs to seal them and prevent any paint from sticking to the nails.

You can apply the acrylic paint and sealer on the nail design before you paint on paint, but if you choose to do this, make sure you do it properly.

Next, you want the nail to sit in the design perfectly.

Apply nail glue to all edges of your design.

Once the nail has glued itself to the designs, apply the wax and sealers to the shapes.

Apply paint to all of the edges.

Apply adhesive tape to the paint on both sides of your nail design to prevent it from sticking on the nails, as well as to the pieces of the shapes to hold them together.

Apply some sealer around the edges so the designs can stay in place.

You want the designs and nail to look perfect.

Once all the nails have been glued, paint them in a nice light brown color and then seal them in place using acrylic paint.

Repeat steps 2 through 5 on the other nails and designs.

Apply an additional coat of nail glue and seal the designs in place with sealer.

Finish the design with the second coat of glue and spray sealer over the edges, giving the designs a nice finished look.

When you are finished, apply a second coat and spray over the paint that you applied on the last coat.

Apply two coats of acrylic paint over the nail designs to give them a nice gloss finish. 

Next, apply some sealers and seal them up.

You don’t want the design or nail to stick to the wax or sealer, so you need some to protect the designs from getting damaged during use.

Apply one coat of sealer and spray the designs with the sealers on the outside of the pieces.

Apply another coat of polish to protect all the designs.

Finally, apply sealer again, this time over the nails that you just applied to the outside.

Repeat step 6 for each of the other nail designs. 

Once all of your designs are sealed, the design will be ready to hang.

To hang the design, hold the nail in place on a flat surface and hang it from the top of the door.

You may need to trim the nail down a little bit to get it to hang from the front of the room, but this is fine. 

It’s a very simple design, but you can create a lot of interesting designs if you make the right nails.

Related Post